Compu-Flow® Econo-Mag™ Insertion Magnetic Flow Meter
The Compu-Flow® Econo-Mag™ Single Point Insertion Flow Meter is engineered with industry-leading features to deliver uncompromised flow measurement solutions for today’s demanding industries.
- User Friendly Interface
- Smart LCD Display
- Easy Prompting
- Effortless Programming
- Instant Readouts
- Single-point Insertion
Description
Compu-Flow® introduces the economical industrial-grade magnetic single point insertion flow meter for superior
flow measurement: The Econo-Mag™. The revolutionary new and enhanced hardware and software design results in
a low-profile, high performance flow meter that delivers precise flow readings due to its advanced proprietary micro- processing technology. Stainless-steel probe with stainless-steel electrodes are mounted in teflon for extended service life. Upper housing and all hardware is either PVC or stainless-steel.
The Compu-Flow® Econo-Mag™ produces a rapidly reversing magnetic field in the probe, and as the fluid moves through this field a voltage is generated. This voltage is measured and translated into a frequency signal that is proportional to flow rate. This digital signal can be sent directly to a PLC, SCADA, or can be processed using any of the Compu-Flow® indicators or receivers. Signal cable is standard 25’, optional to 1000’.
The complete lack of moving parts in the Compu-Flow® Econo-Mag™ flow sensor is the source of its reliability. There is no rotor to stop turning as in dirty water and there are no bearings to wear out. Stainless and PVC materials withstand a variety of temperature, pressure, and chemical conditions. Reverse flow-output and submersible models are optional. The Econo-Mag is a stand-alone flow sensor.
The Compu-Flow® Econo-Mag™ is truly Flow Smart.
Features
- Quick & Easy Installation: Installation time from start to finish is typically 30 minutes.
- User-Friendly: Engineered with an extremely easy to use interface. No math or formulas required.
- High-performance: Out-performs competition in accuracy and reliability. NIST Certified to < 0.5%.
- Zero Corrosion Factor: All exposed components; Stanless-Steel, PVC, or Polycarbonate.
- Compu-FlowTM Smart-Flow Technology: Proprietary technology delivers best-in-class flow readings.
- Lightweight & Low Profile: The Compu-FlowTM Econo-Mag is the first in its class to provide a revolutionary lightweightlow profile hardware design. The future of magnetic flow meters is here. Custom probe lengths optional.
- Multi-industry flow measurement solution: Engineered to measure virtually all conductive water based flows.
- Rapid Response Time: Instant accurate flow readings. Selectable update times.
- Economically Priced: Engineered to be the most economically priced flow meter in its class.
Display:
NEMA – 4X hinged IP65 Temp: (+4°F to +140°F)
Dimensions:
7 x 5 x 3 inches
Totalizer:
12 Digit LCD
Memory Backup 99 yrs +
Rate Meter:
4 Digit LCD Digital Bar Graph
Memory:
Nonvolatile 99 yrs + All parameter inputs
Power:
Isolated-Regulated-Module 100-240 VAC / 1.0A @12VDC
LED Indicators: (Receiver)
Green – Power, Yellow – Echo
Red – Hi/Low Alarm
Outputs:
Digital Pulse Train (0-12V)
4-20mA (MAX z1200 ohm)
RS232 via DB9 Port
Hi-Low Limit Alarms * Batch Control * * (12VDC @50mA)
Transducer:
Stainless steel 1” probe
Power: 12VDC- @ 1.5 watt/ 120mA Submersible 200’ Max IP68
Potted IP68 Non-Metallic
Temp (+4°F to +220°F)
Digital Pulse Train (0-12V)
Analog Signal 12VDC
Smart-LED Indicators: (Transducer)
Green: PWR: Full Pipe, No Flow Green: Flash: Forward Flow Present Yellow: Reverse Flow Present
Red: Low or no water present
Cable Length:
25 ft. standard
0 to 2000 ft. (optional)
Flow Range:
FPS: 0-30 fps/ 10 mps
Resolution .1 fps, 0.03 mps
Pipe ID Range:
0 – 99.99 inches
0 – 2540 mm
Accuracy:
+/- 1% (function of flow profile)
+/- 0.5% with proper piperun
Linearity:
+/- 0.5%
Repeatability:
+/- 0.1%
Engineering Units:
English & Metric
Languages:
• English
Part Number:
CEM-100S
 |
Brochure PDF | 773 KB |
Download Brochure (PDF) |
|---|---|---|
|
Datasheet PDF | 773 KB |
Download Datasheet (PDF) |
|
Quick Start Guide PDF | 773 KB |
Download Quick Start Guide (PDF) |
|
User Manual PDF | 773 KB |
Download User Manual (PDF) |
|
NIST Certificate of Calibration PDF | 773 KB |
Download NIST Certificate (PDF) |
- NEMA 4X display
- Transducer & 25’ cable
- Sensor Strap Kit
- Sonic Coupling Gel
- Documentation
- Wireless Signal 900 mHz
- Data Logger 1- 32 GB
- Flash Drive Internal or Remote
- Probe lengths: 6”,12”, 18”, 24”, 36”
- Custom probe lengths available
2-Year Limited Warranty
TEKSCO USA warrants all Compu-Flow® products for a period of 2 years from date of purchase to conform to the published specifications and to be free from defects in materials and workmanship. This warranty is limited to repair or replacement of parts or products at the discretion of the manufacturer. TEKSCO USA is not responsible for product damage caused by use or misuse nor will they assume liability for any unauthorized repairs, modifications, or installations by other than their personnel or representative. Products to be returned to the factory for warranty repair must have prior approval from TEKSCO USA. Liability will not be accepted for unauthorized returns. No liability will be accepted for damages to customers equipment and/or materials due to use or misuse of the products nor for any loss of profits or other special damages.
This warranty is expressly in lieu of any other warranty or merchantability of fitness for a particular purpose. The remedies of repair or replacement as set forth above are the only remedies under this warranty. TEKSCO USA disclaims any obligation or liability for loss or use of the product warranted, loss of time, inconvenience, commercial loss or any other direct, consequential, special, or incidental damages. This warranty is in lieu of any other obligation or liability of TEKSCO USA of any nature whatsoever.
