Compu-Flow® C6 Portable Doppler Ultrasonic Flow Meter
The Compu-Flow® Doppler Ultrasonic Flow Meter non-invasively and accurately measures flow velocity using our proprietary doppler-ultrasonic technology by sensing signals from reflective microscopic materials within a liquid flowing in the pipe.
- User Friendly Interface
- Smart LCD Display
- Easy Prompting
- Effortless Programming
- Instant Readouts
- Compact & Portable
Description
The Compu-Flow® Doppler Ultrasonic Flow Meter non-invasively and accurately measures flow velocity using our proprietary doppler-ultrasonic technology by sensing signals from reflective microscopic materials within a liquid flowing in the pipe.
An example of this Doppler Effect is similar to a train whistle – increasing in pitch as the train approaches, and decreasing in pitch as the train moves away. To the person riding on the train the pitch remains the same. The increasing pitch is due to phase-front compression and the decreasing pitch is due to phase-front expansion. The Doppler flow meter uses this effect to measure the velocity of a liquid through a pipe wall.
• No pipe section or spool piece is required to install the meter.
• The meter is not affected by changes in temperature, viscosity, specific gravity, or the speed of sound within the liquid.
• The liquid does not have to be electronically conductive.
• Wide range of temperature applications: -30 to 90 deg C – up to 250 deg C with special fittings.
• The transducers are normally coupled to the outer pipe wall with grease, sonic gel, or epoxy.
• In order to obtain accurate measurements adequate up and downstream pipe runs are required.
• AC or DC operation, solar or battery power.
• Non- invasive, Submersible, Clamp-on transducers
• Signal cable lengths up to 1500 m ( 5000 ft)
• High accuracy even in turbulent flows
• Wide pipe diameter range 13mm (0.50 inches) – 2500 mm (120 inches)
• Wall mounted for permanent installation or a portable option is also available.
• All pipe materials – PVC, HDPE, Plastic, Steel, Rubber, Concrete, and Copper
Power:
Isolated-Regulated-Module
100-240 VAC @1.0 Amp - 12VDC
Outputs:
Digital Pulse Train (0-12V)
4-20mA (MAX z1200 ohm) RS232 via DB9 Port
Hi-Low Limit Alarms * Batch Control *
* (12VDC @50mA)
Flow Range:
FPS: 0 - 50 fps / 15 mps
Resolution .1 fps, 0.03 mps
Pipe ID Range:
0.5 - 500 inches
12 - 12000 mm
Accuracy:
1% (function of flow profile)
Linearity:
+/- 0.5%
Repeatability:
+/- 0.1%
Display:
NEMA – 4X hinged IP64 (+4°F to + 140°F)
Dimensions:
7 X 5 X 3 inch
Weight:
8 lbs.
LED Indicators:
Green – Power Yellow – Echo
Red – Hi/Low Alarm
Transducer:
POWER: 12VDC- @ 0.5 watt/ 40mA Submersible 200’ Max
Potted IP68 Non- Metallic
Temp (-70°F to +185°F)
500°F – Heat Sink Option
Totalizer:
12 Digit LCD
Memory Backup 99 yrs +
Rate Meter:
4 Digit LCD Digital Bar Graph
Memory:
Nonvolatile 99 yrs + all parameter inputs
Cable Length:
25 ft. standard
25 ft. - 5000 ft. (optional)
Engineering Units:
English & Metric
Languages:
• English
 |
Brochure PDF | 773 KB |
Download Brochure (PDF) |
|---|---|---|
|
Datasheet PDF | 773 KB |
Download Datasheet (PDF) |
|
Quick Start Guide PDF | 773 KB |
Download Quick Start Guide (PDF) |
|
User Manual PDF | 773 KB |
Download User Manual (PDF) |
|
NIST Certificate of Calibration PDF | 773 KB |
Download NIST Certificate (PDF) |
- NEMA 4X display
- Transducer & 25’ cable
- Sensor Strap Kit
- Sonic Coupling Gel
- Documentation
- Padded Field Case
- Smart Charger & Cable
- Wireless Signal 900 mHz
- Data Logger 1- 32 GB
- Flash Drive Internal or Remote
2-Year Limited Warranty
TEKSCO USA warrants all Compu-Flow® products for a period of 2 years from date of purchase to conform to the published specifications and to be free from defects in materials and workmanship. This warranty is limited to repair or replacement of parts or products at the discretion of the manufacturer. TEKSCO USA is not responsible for product damage caused by use or misuse nor will they assume liability for any unauthorized repairs, modifications, or installations by other than their personnel or representative. Products to be returned to the factory for warranty repair must have prior approval from TEKSCO USA. Liability will not be accepted for unauthorized returns. No liability will be accepted for damages to customers equipment and/or materials due to use or misuse of the products nor for any loss of profits or other special damages.
This warranty is expressly in lieu of any other warranty or merchantability of fitness for a particular purpose. The remedies of repair or replacement as set forth above are the only remedies under this warranty. TEKSCO USA disclaims any obligation or liability for loss or use of the product warranted, loss of time, inconvenience, commercial loss or any other direct, consequential, special, or incidental damages. This warranty is in lieu of any other obligation or liability of TEKSCO USA of any nature whatsoever.
