Compu-Flow® Fixed Transit Time Ultrasonic Flowmeter Model TDS-200-F2
The Compu-Flow® Fixed Transit-Time Ultrasonic Flow Meter Model C6-TDS-100F1 non-invasively and accurately measures the time difference from when the first transducer sends an ultrasonic signal until it crosses the pipe and is received by the second transducer.
• Better than 1% accuracy
• 0.2% of repeatability
• Cast Aluminum with power
coated paint
• Fixed Deluxe Enclosure
• Data Logger (2-8GB)
• RS485 modbus, OCT pulse out
• Relay output, and 4,20mA output
Description
The Compu-Flow® Fixed Transit-Time Flow Meter C6-TDS-100F1 is a fixed mounted ultrasonic flow meter, and can be operated with all our instrument transducers. The electronic’s aluminum enclosure is rated as IP65, thus, can be installed for both indoor and outdoor.
Operation Principle
This ultrasonic flow meter utilizes the well-known transit-time measurement principle, plus our proprietary signal processing and ultrasonic transceiving technologies.
Features Included:
- Better than 1% accuracy
- 0.2% of repeatability
- 2×20 English letters LCD display
- 4×4 key tactile-feedback membrane keypad
- 85-264VAC or 24VDC power supply
- Pipe diameters from 15mm to 6000mm
- Operate with clamp on, insertion and flow-cell transducer
- Five channel analogue 4-20mA input. (version 7)
- One channel programmable 4-20mA output
- Two channel programmable digital out (isolated OCT and Relay)
- Frequency output
- IP65
- SD USB data memory ( 1G, 4G ,8G etc )
Signal Output
One channel standard isolation RS485 output. One channel isolation 4-20mA or 0-20mA active output. One channel OCT output (programmed between the pulse width (6-1000ms), default before leaving the factory (200ms). One channel isolation relay output, with positive, negative, net accumulation pulses and different alarm signals.
Signal Input
Two channel three wire system PT100 platinum resistor input loop, to make heat meter has the function of displaying heat quantity. Three channel 4-20mA input optional, accuracy: 0.1%, has the ability to input the signals of pressure, liquid level, temperature and so on.
 |
Brochure PDF | 773 KB |
Download Brochure (PDF) |
|---|---|---|
|
Datasheet PDF | 773 KB |
Download Datasheet (PDF) |
|
Quick Start Guide PDF | 773 KB |
Download Quick Start Guide (PDF) |
|
User Manual PDF | 773 KB |
Download User Manual (PDF) |
|
NIST Certificate of Calibration PDF | 773 KB |
Download NIST Certificate (PDF) |
- NEMA 4X display
- Transducer & 25’ cable
- Sensor Strap Kit
- Sonic Coupling Gel
- Documentation
- Wireless Signal 900 mHz
- Data Logger 1- 32 GB
- Flash Drive Internal or Remote
2-Year Limited Warranty
TEKSCO USA warrants all Compu-Flow® products for a period of 2 years from date of purchase to conform to the published specifications and to be free from defects in materials and workmanship. This warranty is limited to repair or replacement of parts or products at the discretion of the manufacturer. TEKSCO USA is not responsible for product damage caused by use or misuse nor will they assume liability for any unauthorized repairs, modifications, or installations by other than their personnel or representative. Products to be returned to the factory for warranty repair must have prior approval from TEKSCO USA. Liability will not be accepted for unauthorized returns. No liability will be accepted for damages to customers equipment and/or materials due to use or misuse of the products nor for any loss of profits or other special damages.
This warranty is expressly in lieu of any other warranty or merchantability of fitness for a particular purpose. The remedies of repair or replacement as set forth above are the only remedies under this warranty. TEKSCO USA disclaims any obligation or liability for loss or use of the product warranted, loss of time, inconvenience, commercial loss or any other direct, consequential, special, or incidental damages. This warranty is in lieu of any other obligation or liability of TEKSCO USA of any nature whatsoever.
